A number of new FPV methods launched over the previous few months are based mostly on the Artosyn chipset and share very comparable efficiency and picture high quality. One among these is the BetaFPV Artlynk system. Very inexpensive and really light-weight which is ideal for FPV drones. On this assessment, I’ll take a fast have a look at how the Artlynk performs and whether or not it’s for you.
The place to Purchase
There are presently VTX, FPV goggles, and BNF drones out there.
P1 Air Unit HD VTX:
VR04 HD FPV Goggles:
Meteor75 Professional with P1 Air Unit:
Aquila20 HD FPV Package:
Picture High quality
Artlynk’s picture high quality is noticeably higher than analog. You possibly can see objects farther away and branches extra clearly, and the dynamic vary is kind of good. It’s not on the identical stage as DJI O4, in fact, however for a price range system, it’s very spectacular.
I examined the Artlynk system on the Aquila20 HD drone.
Vary
The marketed vary is 400m+ (the Aquila20 drone), however in my testing I used to be capable of fly past 500m whereas nonetheless sustaining first rate sign. The Aquila20 makes use of a PCB antenna that’s mounted in a considerably questionable and less-than-ideal place, and the goggles include two fundamental dipole antennas.
With higher antennas and improved antenna placement, I’m assured you can obtain nice vary. And that is solely at 200mW—think about higher-power VTX choices are launched sooner or later, long-range efficiency might turn into doable.
Identical to DJI and Walksnail, when sign will get weak you get yellow/purple mild on the edges of the display as visible warning which is useful.
Latency
Throughout flight, latency is noticeably larger than analog—and even larger than DJI O4. This forces you to decelerate when doing something that requires precision, comparable to flying by way of gaps. I did get used to it after a number of flights, but it surely positively makes flying a bit tougher.
While you’re simply cruising, nevertheless, the latency is way much less noticeable and is completely flyable.
To be extra thorough, I measured glass-to-glass latency (digicam to goggles) of some widespread FPV methods utilizing an motion digicam recording at 240fps (outcomes are ± 4ms):
- DJI O4 (100fps): 33ms
- DJI O4 (60fps): 50ms
- Analog: 17ms
- Artlynk: 67ms
As anticipated, Artlynk has the very best latency on this comparability—nearly double that of DJI O4 in 100fps mode. That stated, when you usually fly DJI at 60fps, you in all probability wouldn’t thoughts the small quantity of extra latency.
Because it stands, I feel Artlynk is healthier suited to fixed-wing, or slow-cruising FPV drones. It’s not the only option for racing, bando flying, or something time-critical.
Video Recording
Sadly, the P1 Air Unit doesn’t have onboard video recording. The one method to report footage is through the goggles’ DVR. This implies video high quality is straight affected by sign energy—when the sign degrades, the recording can turn into blurry and even stutter. That is clearly not ideally suited for anybody searching for the very best doable high quality footage, however for informal pilots it’s acceptable.
Goggles DVR recordings are captured at 1080p 60fps, and you may choose bitrate between 8Mbps and 24Mbps. The next bitrate improves picture element and readability, however solely marginally, as proven in my zoomed-in comparisons.
Betaflight OSD isn’t burned into the DVR footage.
As a substitute, an SRT subtitle file is saved alongside every DVR video. Be aware that it’s not Betaflight OSD knowledge. This file solely comprises telemetry knowledge comparable to video hyperlink sign energy, channel, flight time, VTX enter voltage, goggles battery voltage, bitrate, and estimated distance. You possibly can overlay this SRT file onto your video in put up if you want. This works very equally to the unique DJI FPV system (V1). I hope future firmware updates will enable customers to decide on whether or not Betaflight OSD is burned straight into the DVR footage, or no less than have it saved together with DVR movies.
By the best way, the system estimates distance (how far the drone is from the pilot) utilizing sign propagation delay, relatively than GPS. Most digital FPV methods with two-way communication use this technique.
VR04 HD FPV Goggles
At present, just one pair of goggles helps the Artlynk FPV system: the BetaFPV VR04 HD FPV Goggles. They give the impression of being nearly similar to the analog VR04 goggles, however the HD model options two antennas.
The goggles are powered by an exterior battery mounted on the rear of the headscarf. It’s primarily a battery holder that takes two 18650 Li-ion cells, with a USB port for charging and a devoted energy button.
The goggles use a single LCD display and have a really spacious faceplate—I used to be capable of put on my glasses comfortably whereas utilizing them.
Betaflight OSD displayed accurately, and also you get all the same old helpful information on the backside of the display: VTX/Goggles enter voltage, bitrate, distance, and out there SD card storage.
They give the impression of being significantly bulkier than the DJI Goggles 3, however that’s anticipated given the considerably lower cost.
P1 Air Unit VTX
The P1 Air Unit I examined got here from the Aquila20 HD drone, which makes use of a PCB antenna. The standalone P1 VTX you should purchase individually has the identical digicam and VTX, however comes with a dipole antenna as an alternative.
The VTX, digicam and PCB antenna weigh 7.1g all collectively, which is extraordinarily light-weight!
It connects to the flight controller utilizing a 6-pin cable with the identical pinout as DJI Air Models, making it suitable with most flight controllers which have a DJI Air Unit connector.
Digital camera Settings
You possibly can’t report the digicam menu within the DVR, so I needed to take photographs of the goggles show to point out you the menu choices and settings.
The digicam settings are pretty customary, much like most digital FPV methods. Accessible choices embody:
- Sharpness
- Distinction
- Publicity (EV)
- Side Ratio
Sharpness
Sharpness settings 5, 6, or 7 work greatest for me. Setting it larger introduces extreme oversharpening and artifacts, too low it the picture simply look comfortable.
16:9 vs 4:3
The native side ratio is 16:9 which affords the most important subject of view. You possibly can swap to 4:3, but it surely merely crops the left and proper sides of the picture, leading to a smaller general FOV.
In follow, there’s no actual benefit to utilizing 4:3 right here. I like to recommend sticking with 16:9.
left: 16:9 mode; proper: 4:3 mode
Transmission Settings
You possibly can modify bitrate, output energy, and channel. The P1 Air Unit helps output energy ranges from 25mW as much as 200mW.
Potential Issues So Far
DVR Video Encoding Points
There look like encoding points with the DVR footage. DaVinci Resolve (my go-to video editor) had issues exporting edited movies. Whereas I might edit them, clicking randomly on the timeline usually resulted in a short “Media Offline” warning as properly, requiring a number of seconds for the footage to load. This habits additionally occurred in VLC Media Participant—fast-forwarding prompted noticeable loading delays.
It could be a codec-related situation. Hopefully, BetaFPV can deal with this in a future firmware replace.
My workaround: Earlier than importing the video in my video editor, I exploit GoPro Participant (free to obtain) to export the footage utilizing a unique codec on the highest doable bitrate so I don’t lose any high quality.
Video Connection Problem
Sometimes, after crashing far-off, the video feed doesn’t reconnect even after I get near the drone. I needed to restart the drone to revive video connection (energy off and energy on once more)
I tried to breed this by strolling away from the drone till video was misplaced, however as quickly as I walked again inside vary, video reconnected instantly. The difficulty appears to be fairly random.
Replace (04/01/2025): I imagine I’ve recognized the trigger—video doesn’t reconnect when the VTX overheats. This may occur if the drone crashes or sits on the bench powered on for too lengthy with out ample airflow for cooling.
Remaining Ideas
That is solely an preliminary assessment, and I’ll proceed updating this put up as I spend extra time with the Artlynk system. Picture high quality is clearly an important enchancment from analog. {Hardware} are light-weight which is nice for FPV drones. I hope latency might be diminished additional to make it extra versatile. There are some clear points, however with firmware and {hardware} enhancements, hopefully it’ll get higher over time.
In the intervening time, the Artlynk ecosystem remains to be restricted when it comes to goggles and VTX choices, and general efficiency doesn’t but match extra established methods like DJI or Walksnail. That stated, Artlynk may be very inexpensive and affords a low-cost entry level into HD FPV for budget-conscious pilots.
I’m excited to see how this platform evolves.
To study extra about all FPV methods and which one could be best for you, try my full evaluation right here: https://oscarliang.com/fpv-system/
